June 25th, 2011 
Admin 
All Kinds Usage of LED Strip Lights
This paper examines when the LED strip lights and their application in the world of lighting. This article will look specifically at home lighting, emergency lighting, lighting, police and club lighting their use.
LED strip lighting is the latest in the world play an important role in innovation and emergency lighting. Emergency lighting, and people in early warning and assistance during emergency evacuation. Flash LED strip lights is a step ahead, and proved its effectiveness in the light. Light sticks have recently found their way into the home, for display purposes. They are used in cabinets, cupboards and other glass enclosure. These special than other LED strip light, but just as effective. They come up with a centralized system that can be used both on and off lights and adjust the light color and light intensity.
LED strip lights are most familiar with is the use of police cars. Police have taken advantage of LED strip lights, to more effectively do their police work. Light bar brighter than their predecessors, but also a greater variety of flash modes. As for the advantages of multiple flash patterns of light sticks to attract more attention, and can be easily seen from a distance. The LED strip lights for longer, which means that the cost of their long-term preservation. The strobe light bars, or other life than the quality of light bars and the amount of energy they use is no longer much less.
LED strip lights is an effective form of emergency lighting, and has the same to ensure safe evacuation in case of emergency the person in charge of work. LED lights can be used for emergency lighting bar is very thin, long, and along designated escape routes. These lights are bright and work, the main power supply independent, to ensure that they are still light in case of power failure, that is. These special light bars last the longest, because they are not continued. They are perfect, just as they evacuated the purpose of light quality was great, you can fire underwater work. Most modern LED strip lights is for both fire and water and keep working, even in these disasters.
Today, as a nightclub flash LED strip lights using bar replacement. These specific light bar is at home and those who use the different police cars. They are larger, use more energy. They are also bright, mainly because of the dark and closed space, or used. They are also synchronized to the music, which greatly increased the clubbing experience of beating. They produce very little heat works, the club's audience, because they do not make the club too hot and comfortable. LED strip lights is the bar in the light of the world's major players. Although they initially expensive, they are a good investment, and the advantages completely outweigh the costs.
Posted in 
Tags:
How to Install LED strip light into 07 Accord LX?
Ok so i Have an Accord 07′ with black interior, so i was thinking of getting Blue LED strip lights which are sold in local Autozone. I wasnt to install it on the side of the door, for example when the door is open the lights show on the side of the door. something similar to this link..
http://ijdmtoy.com/BLOG/Showcase/hot_girl_gallery/libraries/thumb.display.php?max=491&q=80&img=galleries/%5B2010-07%5D%20Acura%20TL/Acura-TL-LED-01.jpg
Can someone please help me to install this. Like i want the LED lights to turn on everytime the door opens. Just the way on some doors, on the bottom their is a light which turns on everytime the door is opened. Just like that….Please can someone help me? I am alittle confused…..Thanks!!
I am considering a LED light strip?
This would be for ambient light on the ceiling in my kitchen. It provides 180 lumens of light per foot. What would this light be equivalent to?
You need to install a Push-to-make (A push-to-make switch returns to its normally open (off) position when you release the button) switch on the hinge side of the door or a push-to-break switch (A push-to-break switch returns to its normally closed (on) position when you release the button) on the handle side of the door (similar to a refrigerator light switch setup). This is the mechanical means of switching the light, there are other ways such as optical switching but the setup is more complicated.
I HAVE A BAJAJ PULSAR AND I WANT TO ADD A LED STRIP LIGHT BUT DONT KNW WERE PLZ HELP?
i hav a led strip light and i dont knw were to add tht light
i also have two blue led light bulb fitted on headlights eyes
any other suggesstions for adding lights on my bike plz tel me
What type of LED light strip do I need to make this?
I wanted to make Thomas Bangalter’s helmet from “Daft Punk” and I wanted to know what light strip I needed to display words and etc. on it.
For those of you who are not familiar with it, it looks like this:
http://www.google.com/imgres?imgurl=http://www.exclaim.ca/images/up-4daft.jpg&imgrefurl=http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl%3Fnum%3D1255490199&usg=__mAiI7aj_yNVjs8vXQYa7xGlfZZA=&h=373&w=460&sz=37&hl=en&start=0&sig2=IBQkba1RFGpov88KNNU7Pw&zoom=1&tbnid=DXQNxJmuFtiOxM:&tbnh=120&tbnw=148&ei=4nW5TYyQLqKX0QH2moXaDw&prev=/search%3Fq%3Ddaft%2Bpunk%2Bthomas%2Bbangalter%2Bhelmet%26um%3D1%26hl%3Den%26sa%3DG%26biw%3D1366%26bih%3D677%26tbm%3Disch&um=1&itbs=1&iact=hc&vpx=603&vpy=349&dur=292&hovh=180&hovw=221&tx=102&ty=137&page=1&ndsp=29&ved=1t:429,r:17,s:0
Also, what LED light strip do I need to create the glow effect around it?
http://www.google.com/imgres?imgurl=http://www.philth.ie/images/daft-punk-encore-costumes.jpg&imgrefurl=http://www.philth.ie/2008/06/23/how-to-make-your-own-daft-punk-suit/&usg=__x-1roc46iK0bAEAlxCZTnvrMgSQ=&h=560&w=426&sz=25&hl=en&start=0&sig2=EMfVtKzYHcUODHksgfF58g&zoom=1&tbnid=QKmcjwys6lg70M:&tbnh=129&tbnw=98&ei=qHa5TZbRCIfq0gGg9cDpCA&prev=/search%3Fq%3Ddaft%2Bpunk%2Bencore%2Bsuite%26um%3D1%26hl%3Den%26biw%3D1366%26bih%3D677%26tbm%3Disch&um=1&itbs=1&iact=hc&vpx=119&vpy=54&dur=4066&hovh=257&hovw=196&tx=132&ty=147&page=1&ndsp=30&ved=1t:429,r:0,s:0
I do not want to replicate the whole suit, just the helmet on the left.
can i grow cuttings/seedlings under an led strip light?
the kind you have around the house that you can plug in, they have lots of little leds forming 1big light?
Plants need 2 things from light, sufficient brightness and the correct lightwave frequency to enable them to photosynthesize.
If the brightness is good, then you may get growth, especially if supplemented with natural light. The risk is that the useable light frequency will be insufficient, and you may get plants that get a little leggy, as they strain to get more of the light that they need.
how to wire a transistor/relay to an amplifier to light an LED strip?
I want to make the lights light with the beat of the subwoofers. I read that a transistor could be used, and i have been experimenting with relays, with no joy. Anyone done this before?
Relays and transistors.. no. You’ll just blow out the amp messing like that.
The lights which pulse in time to the beat have a microphone in them to sense the bass notes.
StreetGlow does a nice universal box for their neon kits, it does what you want for only $22:
http://www.amazon.com/gp/product/B0002SA01O?ie=UTF8&tag=deccomcarauda-20&linkCode=as2&camp=1789&creative=390957&creativeASIN=B0002SA01O
Then just hook up whatever lights you like to it:
http://www.amazon.com/gp/product/B000UV8FNS?ie=UTF8&tag=deccomcarauda-20&linkCode=as2&camp=1789&creative=390957&creativeASIN=B000UV8FNS
fix it on the two sides of the tail. and u can fix a light at the bottom of the bike it makes ur bike nice
pls try http://www.genuinelaptops.com and the ads on it
I think if you don’t know the exact lumens you can use a dimmer instead to control the light’s brightness. More flexible.
http://www.ledlightsworld.com/led-dimmer-p-118.html
A dimmer of this kind is easy to install and use.